A • Make sure you have plenty of fuel
• Make sure the fuel tap is on
• Make sure the engine-switch is on
• Make sure the oil level is correct
• Remove spark plug, connect spark plug lead and
earth it to the generator. Pull starter cord gently and
look for a spark. If there is no spark, replace spark
plug.
Spark plug is OK, but engine still won’t start
• Check fuel tap fi lter is clean
• Check fuel line is clear
• Check carburetor is not clogged
Engine will not start
• Clean or replace spark plug
• Check ignition system – if faulty, contact your service centre
• Check compression – if low, contact your service
centre
• Check for loose cylinder head – tighten bolts
• Check for damaged cylinder head gasket – replace
if necessary
