Forklifts are industrial handling vehicles, mainly used for loading and unloading, stacking and short-distance transportation of pallet goods. It plays a key role in the company's logistics handling system and is widely used in stations, ports, airports, factories, warehouses and other places. Forklifts are usually driven by fuel engines or batteries, and the main technical parameters include rated lifting weight, load center distance, maximum lifting height, gantry Angle, maximum traveling speed, minimum turning radius, minimum ground clearance, and wheelbase, wheel base, etc.

Our Huahe forklifts are mainly divided into three kinds: diesel forklifts, lithium electric forklifts and natural gas forklifts. The following is a brief introduction to their main differences and their respective advantages for your reference.

The main difference between them is the driving method and the type of energy, which also leads to their respective use environment and operating costs are different.

Lithium Forklift:

Lithium forklifts use an electric drive system and usually need to be connected to a power source to work. It provides power through a variety of motors, including drive motors, lift motors and controller motors. Electric forklifts are usually powered by batteries, but other power supplies such as supercapacitors can also be used.

Lithium forklifts use batteries as their main type of energy, and these batteries usually need to be recharged periodically at a charging station. Electric forklifts are favored for their clean, quiet and efficient features. 

Lithium forklifts are suitable for low noise, low volatility and low vibration environments because they do not emit harmful substances and noise-producing engines. Electric forklifts are commonly used in places such as indoor warehouses and production lines.

The operating costs of lithium forklifts are relatively low because they only require the purchase of batteries and charging equipment. In addition, electric forklifts are also less expensive to maintain because they do not have complex engines and transmission systems.

The other two types of forklifts from Huahe are both internal combustion forklifts, and the following are the similarities between the two models.

IC Forklift

The other two types of forklifts from Huahe are both internal combustion forklifts, and the following are the similarities between the two models.

Internal combustion forklifts use fuel as their primary energy type, which means they need to purchase fuel and maintain adequate reserves. Although the operating cost of the internal combustion forklift is relatively high, its flexibility and mobility are greater. 

Internal combustion forklifts are suitable for outdoor or high noise environments because they can operate without power and can meet higher load capacity requirements. Internal combustion forklifts are commonly used in places such as freight ports, construction sites and large production workshops.

Internal combustion forklifts are relatively expensive to operate, as they require the purchase of fuel and lubricants and regular oil and filter changes. In addition, internal combustion forklifts are also more expensive to maintain because they have complex components such as engines and transmissions.

LPG Forklift:

The forklift belongs to a kind of internal combustion forklift, which is driven by fuel engine. This forklift of Huahe is used together with gasoline and liquefied petroleum gas. 

Diesel Forklift:

Diesel forklifts are also internal combustion forklifts, driven by fuel engines and using diesel fuel. It also uses a conventional spark ignition or compression ignition system to detonate the gas mixture, which in turn drives the piston to work to provide power.

In short, electric forklifts and internal combustion forklifts have their advantages and disadvantages, and what type of forklift to choose will depend on the needs of users and the use of the environment. Electric forklifts are suitable for low noise, low volatility and low vibration environment, usually used in indoor warehouses and production lines and other places; The internal combustion forklift is suitable for outdoor or high noise environment, usually used in freight ports, construction sites and large production workshops and other places. I think after a detailed classification, you can choose which type of forklift products according to your needs. These three types of forklift products are mainly different specifications, you can check the product details to do further understanding, I hope my description will be helpful to you.