-
Q Repeated circuit breaker tripping
A CAUSE:1.Overload.2. Faulty cords or equipment.
CORRECTION:1. Reduce load.2. Check for damaged,bare,or frayed wireson equipment. Replace.
-
Q Engine is running but no AC output
A CAUSE:1. Faulty receptacle.2. Circuit breaker tripped.3. Defective capacitor.4. Faulty power cord.
CORRECTION:1. Have Service Center replace.2. Reset breaker.3. Have Service Center replace capacitor.4. Repair or replace cord.
-
Q Engine will not start
A CAUSE:1. Low on fuel or oil.2. Ignition switch in "Off" position.3. Faulty spark plug.4. Choke in wrong position.5. Fuel shut-off valve is closed.6. Unit loaded during start-up.7. Spark plug wire loose.
CORRECTION:1.Add fuel or oil.2. Turn to "ON"position.3. Replace spark plug.4. Adjust choke accordingly.5. Open fuel shut-off valve.6.Remove load from unit.7.Attach wire to spark plug.
