High Pressure Cleaning Machine Common Problems And Inspection Methods

High pressure cleaning machine common problems and inspection methods

As a common and efficient cleaning equipment in modern home and business environments, high pressure cleaners have a wide range of application scenarios. However, in the process of use, users may encounter some common problems. This article will analyze and answer the common problems that may occur during the use of the high pressure washer.

Starting difficulty

The difficulty of starting the high pressure washer is one of the most common problems during use. Possible causes include:

1. Power problem: First of all, you need to check whether the power supply is connected properly, whether the voltage is stable, whether the plug is firm, and whether the socket has electricity. If the power cable is damaged, replace it with a new one. If the voltage is unstable, it may cause the motor to fail to start normally.

2. Fuel problem: If the high pressure washer uses fuel as the power source, it is necessary to check whether the fuel is sufficient, whether the fuel is expired or polluted.

3. Internal failure of the machine: such as motor damage, circuit failure, etc., need to ask professionals for maintenance.

Underpressure

The pressure washer may have insufficient pressure during use. This may be due to several factors:

1. Nozzle blockage: It is necessary to check whether the nozzle is blocked regularly during use, otherwise it will seriously affect the pressure output.

2. Machine wear: the internal parts of the machine, such as the sealing ring, will be worn for a long time, affecting the working pressure of the machine.

3, wrong operation: such as the use of inappropriate cleaning agents or wrong mode of operation, may also lead to insufficient pressure.

The water flow is unstable

Unstable water flow is another common problem in the use of high pressure washers. This may be due to:

1. Water pump failure: internal parts of the water pump damaged or aging, bearing wear, pipe blockage and other reasons may cause. If it is found to be worn or clogged, it needs to be replaced or cleaned.

2. Water inlet pipe blockage: Water inlet pipe blockage will affect the stability of water flow, need to be cleaned regularly.

3. Power supply voltage fluctuation: Instability of power supply voltage may also lead to unstable water flow.

Excessive noise

High pressure cleaning machine in the operation process of excessive noise, may be caused by the following reasons:

1. Machine wear: such as bearing, gear and other parts wear, will produce abnormal noise.

2. Installation problems: If the machine is not installed smoothly or the connecting parts are loose, it will also produce noise.

3. Wrong operation mode: Improper use of detergent or operation mode may cause damage to the internal parts of the machine and produce noise.

Leakage problem

Pressure washers may have leakage problems during use, which may be due to:

1. Aging or damage of high-pressure pipes: After prolonged use, high-pressure pipes may age or be damaged, resulting in leakage.

2. The connection parts are loose: For example, the connection point between the spray gun and the high pressure pipeline is loose, and it is easy to leak.

3. High pressure cleaning machine design problems: some machines may have design defects, resulting in insufficient sealing and leakage. For such problems, contact the manufacturer to repair or replace the device.

Insufficient pressure: Insufficient pressure may be caused by pipe blockage, pump wear, scale accumulation and other reasons.

Improper maintenance

Improper maintenance is also one of the problems that may occur during the use of the high pressure washer. In order to ensure the normal operation of the equipment and extend the service life, it is necessary to regularly maintain and maintain the equipment. This includes cleaning wearing parts such as filters and nozzles, checking and replacing worn parts, etc. Improper maintenance may result in frequent equipment failures.

In addition, we need to pay attention to the following:

1. When using the high-pressure cleaning machine, it is necessary to operate according to the requirements of the manual to avoid overload use.

2, regular maintenance and repair of the high pressure cleaning machine, timely replacement of worn parts to ensure the normal operation of the equipment.

3. When repairing and maintaining the equipment, it is necessary to ensure safe operation and avoid accidents.

4. If you encounter problems that cannot be solved, it is best to ask professionals for overhaul and maintenance.

To sum up, for the common problems that may occur during the use of the high pressure washer, we need to pay attention to prevention and maintenance in daily use, and be familiar with the working principle and correct operation method of the equipment. When there is a failure, professionals should be contacted in time for overhaul and maintenance to ensure the normal operation of the equipment and extend the service life.